1. The bathtub needs to be cleaned weekly: use sponge or flannel when cleaning the acrylic bathtub, do not use coarse cloth, scouring pad, do not use any cleaning agent containing granular objects, try to avoid direct sunlight and high temperature cigarette butts touch. Use mild detergent (such as dishwashing detergent), do not use abrasive detergent. Acrylic bathtubs can also be cleaned with glass water. The cast iron bathtub should be thoroughly rinsed with clean water after each use, and wiped dry with a soft cloth. If you encounter stubborn stains, you can use a small amount of abrasive cleaning agent to clean it. Use a soft nylon brush to clean the bottom non-slip surface. Do not use steel wire balls, steel wire brushes or abrasive sponges to scrub.
2. Don't use strong alkali to wash the bathtub: When cleaning the bathtub, use a neutral liquid detergent and use a flexible cloth or a good sponge; do not use abrasion and strong alkaline cleaning products; avoid using dark detergents, because it is easy Cause the pigment to seep into the surface of the tub. Do not leave metal objects in the bathtub. They will rust and stain the surface of the bathtub.
3. Gentle treatment of surface stains: You can use a discarded soft toothbrush dipped in bleaching powder to scrub the surface, which can remove stains and mold. When you encounter difficult stains, you can also use half a lemon dipped in salt to wipe, or you can use a soft toothbrush with whitening toothpaste to scrub. Turpentine is also very useful at this time. For scale, the products used to clean the toilet are very useful. If you don't like the pungent smell, you can also use the lemon home improvement net and white vinegar, which is a more natural method. Do not use detergents with fading function, especially when the bathtub at home is colored. To deal with mold and fungal disease-causing bacteria, rinse with bleaching powder and peroxide water and wipe dry immediately.
4. Regularly wipe and disinfect with boiling water: Because the bathtub has been in contact with water for a long time, it is easy to breed some mold or bacteria. You may most easily think of disinfection water, but not all bacteria and molds can be eliminated by disinfection water. Therefore, we should wipe the bathtub with boiling water regularly, and remember that only soft cotton cloth can be used for wiping.
5. Don't move it privately, and repair the scars in time: After the bathtub is installed, don't move it privately. If you need to move the position, you must contact a professional. Do not hit or hit the surface with hard objects, causing bruises or scratches. If you need to repair the dull or scratched part of the acrylic bathtub, you can use a clean cloth mixed with a colorless automatic polishing solution to wipe vigorously, and then apply a layer of colorless protective wax. Do not wax the area where your feet are left to prevent slipping.